鋼化、半鋼化玻璃 鋼化、半鋼化玻璃是將普通玻璃進行加熱并急冷處理后得到的，有強大均勻壓應力且機械強度大幅增加的玻璃。鋼化玻璃表面壓應力在 95MPa 以上，強度約為普通玻璃的 4 - 5 倍；半鋼化玻璃表面壓應力在 24 - 69MPa 之間，強度約為普通玻璃的 2 倍。 產品特性： 安全性強，玻璃破碎后成為顆粒狀，對人體不會造成傷害。 強度高，可耐受更大的載荷。 熱穩定性，能承受的溫度約是普通玻璃的 3 倍，可經受約 300℃溫度變化。 產品規格： 厚度：3 - 19 mm 小尺寸：100 × 250 mm 英文部分The tempered and semi-tempered glass is obtained by heating and quenching ordinary glass, and has a surface with strong uniform compressive stress and a large increase in mechanical strength. The surface compressive stress of tempered glass is above 95MPa, the strength is about 4 - 5 times of that of ordinary glass, and the surface compressive stress of semi-tempered glass is between 24 - 69MPa, and the strength is about twice that of ordinary glass. Product Features: The safety is strong, and the glass is broken into particles, which will not cause harm to the human body. High strength and can withstand higher loads. It has strong thermal stability and can withstand a temperature of about 3 times that of ordinary glass and can withstand a temperature difference of about 300℃. Product specifications: Thickness: 3 - 19 mm Minimum size: 100 × 250 mm Maximum size: 3000 × 6000 mm CURVED TEMPERED GLASS 彎鋼化玻璃 普通熱彎玻璃是將玻璃加熱至軟化點然后靠自重或外界作用力將其彎曲成型并經過自然冷卻后制成彎鋼化玻璃或熱增強玻璃；是在彎曲變形后，再用專用設備快速風冷制成的。因此具有鋼化、半鋼化玻璃的相關特性。此外，還可制成彎中空玻璃、彎夾層玻璃、或中空夾層鍍膜玻璃（陽光反射或 LOW - E 鍍膜玻璃）。 適用范圍：各類曲面造型玻璃，包括玻璃幕墻、坪隔斷、頂棚、家私等。 產品規格： 厚度：5 - 19 mm 小尺寸：280 × 600 mm 大尺寸：2400 × 4200 mm 小彎曲半徑：1000mm (15 - 12mm)、1500mm (15 - 19mm) 英文部分Ordinary hot-bending glass is made by heating the glass to the softening point and then bending it by its own weight or external force and after natural cooling. The bent tempered glass or the heat-enhanced glass is bent and deformed, and then the wind is fastened by special equipment. It is made of cold and therefore has the relevant properties of tempered and semi-tempered glass. In addition, curved hollow glass, curved laminated glass, or hollow laminated coated glass (sunlight reflective or LOW-E coated glass) can be produced. Scope of application:All kinds of curved surface glass, including glass curtain, ping partition, ceiling, furniture and so on. Product specifications: Thickness: 5 - 19 mm Minimum size: 280 × 600 mm Maximum size: 2400 × 4200 mm Minimum bending radius: 1000mm(15 - 12mm)、1500mm(15 - 19mm)